T Type SC Fast Connector for FTTH Applications

The T Type SC Fast Connector is a type of optical fiber connector that is designed for quick and easy installation in the field. It is widely used in Fiber to the Home (FTTH) applications, as well as in other telecommunications networks.

  • Quick and easy installation
  • No epoxy, polishing, or heating required
  • High return loss, low insertion loss
  • Reliable and superior optical performance
  • Reusable up to 10 times

Description

The T Type SC Fast Connector from EPCOM is a pre-polished, field-installable connector that revolutionizes fiber optic termination. Designed for simplicity and reliability, this fiber optic quick connector eliminates the need for curing ovens, epoxy, or extensive polishing in the field. This makes it an ideal solution for technicians working on Fiber to the Home (FTTH) networks, local area networks (LANs), and data center applications where speed and efficiency are paramount. Its innovative T-shaped fixture ensures a secure and precise connection every time, significantly reducing installation time and potential for errors.

T Type SC Fast Connector in green and blue colors

 

Key Features and Benefits of the T Type SC Fast Connector

  • Rapid Field Installation: Terminate a fiber in under two minutes without specialized tools or messy epoxy, drastically improving technician productivity.
  • High Reliability: The pre-polished ferrule and factory-controlled cleave ensure consistently low insertion loss and excellent return loss, meeting stringent performance standards.
  • User-Friendly Design: The unique T-type guiding fixture simplifies the fiber alignment and crimping process, minimizing the skill required for high-quality terminations.
  • Cost-Effective: By eliminating the need for power supplies, ovens, and polishing consumables, the overall cost per termination is significantly reduced.
  • Durability: Engineered for stability, these connectors are reusable and can withstand hundreds of mating cycles, making them perfect for maintenance and repair scenarios.
  • Versatile Compatibility: Compatible with standard SC connector interfaces and suitable for 2.0mm, 3.0mm drop cables and 0.9mm indoor cables.

Technical Specifications of the T Type SC Fast Connector

EPCOM’s connectors are manufactured to the highest quality standards to ensure optimal performance in any environment. They comply with major international standards such as those from the International Electrotechnical Commission (IEC), guaranteeing interoperability and reliability.

Parameter Specification
Applicable Fiber Single Mode (SM 9/125)
Connector Types SC/APC (Green), SC/UPC (Blue)
Applicable Cable 0.9mm Buffer Fiber, 2.0mm & 3.0mm Drop Cable
Insertion Loss (IL) ≤ 0.3dB (Typical ≤ 0.2dB)
Return Loss (RL) UPC: ≥ 50dB; APC: ≥ 60dB
Tensile Strength > 30 N
Durability > 500 matings
Operating Temperature -40°C to +85°C
Dimensions 55mm (L) x 9mm (W)

Simple Installation Guide for the T Type SC Fast Connector

Achieving a perfect termination is a straightforward process that requires minimal tooling. For best results, EPCOM recommends using quality instruments.

Step 1: Prepare the Fiber

Carefully strip the outer jacket, buffer coating, and acrylate coating from the fiber optic cable. A reliable tool is essential for this step to avoid damaging the delicate fiber. We recommend using a professional 3-hole fiber stripping plier for clean and precise results.

Step 2: Cleave the Fiber

A high-quality cleave is critical for low-loss connections. The fiber must be cut at a perfect 90-degree angle. Use a high-precision fiber cleaver to achieve a mirror-smooth and flat end-face. Clean the cleaved fiber with an alcohol wipe.

Step 3: Assemble the T Type SC Fast Connector

Insert the prepared fiber into the T-type fixture and slide it forward into the fast connector body until it makes contact with the internal, pre-polished fiber stub. The embedded index-matching gel will fill any microscopic air gaps. Once the fiber is seated, activate the internal wedge clamp to secure the fiber permanently in place. Remove the T-type fixture to complete the assembly.

Step 4: Verify the Connection (Optional but Recommended)

For critical applications, verify the quality of the termination. Use a visual fault locator to check for light leakage or a fiber end-face detector to inspect the ferrule for any dirt, debris, or imperfections before connecting it to the network.

APC vs. UPC: Choosing the Right Polish

EPCOM offers the T Type SC Fast Connector in both Angled Physical Contact (APC) and Ultra Physical Contact (UPC) versions to suit different network requirements. Understanding the difference is key to ensuring performance. Industry standards, often guided by organizations like the Telecommunications Industry Association (TIA), help define their applications.

SC/APC (Green): Features an 8-degree angled ferrule. This minimizes back reflection, offering superior return loss. Ideal for RF and video signal transmission in FTTH systems.
SC/UPC (Blue): Has a flat-end ferrule polished to an extremely fine finish. It provides very good performance and is commonly used in data centers and general digital optical networks.

Why Choose EPCOM’s T Type SC Fast Connector?

At EPCOM, we are committed to providing robust and innovative fiber optic solutions. Our T Type SC Fast Connector is a testament to this commitment, offering a superior blend of performance, speed, and ease of use. Every connector undergoes rigorous quality control to ensure it meets or exceeds industry specifications for insertion loss and return loss. When you choose EPCOM, you are not just buying a component; you are investing in a reliable network infrastructure backed by expert support.

Contact us today for a quote or to learn more about how our field assembly connectors can streamline your fiber optic projects.

 

Related products